I have a Call Manager 4.1 Server Pub and Sub. Its now in a lab environment with the old production configuration in it. Is it possible to wipe the CCM clean and start over? Or do you have to re-install the Application ? I want to delete all the records that are currently configured. Any suggestions or good links would be appreciated.
A uninstall of the CM application from Control panel is not possible. So you will have to wipe it out clean. For this you will need the hardware detection discs or OS disks that came with the Callmanager cd kit.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...