Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call Manager 4.2 User associated with all devices?

I have a TAPI application which needs the Cisco TSP to log into Call Manager (v4.2) using an account which has access to all devices (so that the application can make calls from any device).

(1) Would it cause any problems (e.g. performance) to associate a Call Manager user with say 1,000 devices?

(2) Is there a better way to enable TAPI to make calls from any Call manager device?

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: Call Manager 4.2 User associated with all devices?

Hi

It's quite common for this type of thing to be configured for application such as ARC (for monitoring line status mainly in that case) and others..

There is a 'allow cti control of all devices' in new CCM versions, but I believe the app has to be coded to use that.

So for many you have no choice but to associate the phones... can become a pain administratively.

There are limits on the number of devices you can monitor - I think it's 2500 per CCM (i.e. per TSP instance).

Like everything else, it adds load to your server, but how much depends on how busy you/it is.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES
Super Bronze

Re: Call Manager 4.2 User associated with all devices?

Hi

It's quite common for this type of thing to be configured for application such as ARC (for monitoring line status mainly in that case) and others..

There is a 'allow cti control of all devices' in new CCM versions, but I believe the app has to be coded to use that.

So for many you have no choice but to associate the phones... can become a pain administratively.

There are limits on the number of devices you can monitor - I think it's 2500 per CCM (i.e. per TSP instance).

Like everything else, it adds load to your server, but how much depends on how busy you/it is.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Call Manager 4.2 User associated with all devices?

Aaron,

Many thanks for your helpful reply.

Armed with the information you provided, I found the "CTI Super Provider" in the Call Manager 4.2 System guide, which I hope will meet my needs.

Regards

André

162
Views
0
Helpful
2
Replies