Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

VIP Purple

Call manager AD integration

Hi All,

Can we integrate two ADs with single call manager cluster?

any reference DOC,please share.

regds,

aman

3 REPLIES

Call manager AD integration

Aman,

If we are just talking synchronization then yes, you can synchronize from two separate AD environments. However, you must ensure that the versions are the same and that the user attribute you are using is guaranteed to be unique in both AD forests.

Authentication, on the other hand, is a little different. You specify the LDAP auth agreement to a single AD forest. So, unless you are talking about two different AD trees in the same forest AND you have the appropriate trust relationships in place, you are not going to be able to support LDAP authentication.

One of the things you could look at is MS ADAM. I have researched this but have not used it. The idea is that ADAM can pull info from separate AD envorinments and become a clearing house or aggregation point, if you will. That is probably a poor explanation but the characterization isn't really all that far off. You still have to ensure that your UID attribute is unique but ADAM can do some normalization (from what I understand).

The best place to start reading up on this is the UC SRND (www.cisco.com/go/srnd)

HTH.

-Bill (http://ucguerrilla.com)

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

VIP Purple

Call manager AD integration

Hi William,

thanks for info.

I would read SRND and would let u know if any clarification is required.

regds,

aman

New Member

Call manager AD integration

Hello Aman,

How are you? coming to your question, Yes, it is possible to integrate multiple AD's with one CUCM, but before Integrating the AD make sure to update all user information in the AD and based on that information create the Filters.

One of the useful document path given below, please have a look.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080b65da7.shtml

Regards,

M.Madhusudhana Rao

89
Views
10
Helpful
3
Replies