02-02-2012 01:43 PM - edited 03-16-2019 09:22 AM
Hi there,
I have found some guide that show how to do the integration between CUCM and Exchange 2010.
But I am looking for a kind of a SRND guide that shows the requirement in therm of bandwidth, in therm of milisecond delay maximum we can have between cucm and Exchange... so on..
anyone ?
Solved! Go to Solution.
02-02-2012 01:49 PM
Hi
It's just a G711 voice call, so you can assume the same guidelines that apply to any voip call apply to Exchange.
Guidelines are typically 150ms delay one-way, minimal (<1%) packet loss, etc... Though in reality certainly things like delay can be stretched quite far.
Principal Engineer at Logicalis UK
Please rate helpful posts...
02-02-2012 01:49 PM
Hi
It's just a G711 voice call, so you can assume the same guidelines that apply to any voip call apply to Exchange.
Guidelines are typically 150ms delay one-way, minimal (<1%) packet loss, etc... Though in reality certainly things like delay can be stretched quite far.
Principal Engineer at Logicalis UK
Please rate helpful posts...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide