08-02-2013 02:10 AM - edited 03-16-2019 06:40 PM
Hello
I am trying to find capability to setup CME on ASRs.
I would think this would need something similar to PVDMs depending on the number of IP Phones that are to be serviced.
But I do not think there are PVDMs capability for ASRs.
I found something similar: DSP - SPA but could not find any details on how much phones / calls it can support; any advice will be much appreciated.
Many Thanks in advance.
Kaushik
Solved! Go to Solution.
08-02-2013 02:26 AM
Ray,
CCME is not supported on the ASR...
Here is the software compartibility marix for CCME
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
08-02-2013 04:57 AM
That SPA contains DSPs for CUBE, which is supported on the ASR, to utilize for transcoding. ASR does not support CME as aokanlawon already stated.
Please remember to rate helpful responses and identify helpful or correct answers.
08-02-2013 02:26 AM
Ray,
CCME is not supported on the ASR...
Here is the software compartibility marix for CCME
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
08-02-2013 02:44 AM
Thanks a lot for your response.
I found this article
http://www.cisco.com/en/US/prod/collateral/routers/ps9343/data_sheet_c78-659915.html
where it shown IP Phones connected to the Routers. Is it via some other platform?
I am new to ASRs and would be grateful to have some insight into this.
Many Thanks
08-02-2013 04:57 AM
That SPA contains DSPs for CUBE, which is supported on the ASR, to utilize for transcoding. ASR does not support CME as aokanlawon already stated.
Please remember to rate helpful responses and identify helpful or correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide