Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call Manager Express, Virtual number setting

Hi all.

 

I want create to virtual phone number on CME.

For example, inbound call number is 6000. (This number don't have physical ip phone. Representative number)

If, Can I used call-forward to another phone number?

 

And, If it can use, Please give me CME config for using.

 

Thanks.

3 REPLIES
Cisco Employee

If all you want is to

If all you want is to translate 6000 to something else, just use translation rules 

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/64020-number-voice-translation-profiles.html

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/61083-voice-transla-rules.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Thanks for your reply. Based

Thanks for your reply.

 

Based on your reply, I create config for sample. Verify please.

 

voice translation-rule 2
rule 2 /^6000$/ /60../

 

Inbound call 01-2345-6000 (Representative number),

6000 -> 60xx number.

 

Is this config correct?

 

Thank you.

Cisco Employee

It kinda looks OK, but I have

It kinda looks OK, but I have no idea of your config or what routing you want, whether it will work or not, that's up to whatever you have configured and how you want your routing to work.

You usually set it directly to other DN (ie 6001), either a pilot, or something like that. Again, that's completely up to your config.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
173
Views
0
Helpful
3
Replies
CreatePlease to create content