Call manager Route-list rejecting the call due to ALL BUSY
Why does the RL reject a call ? A call sent from UCM ( 6.1.5) cluster 1 sent to GK, which is then routed to another CUCM cluster 2 on same LAN.
All DID calls are working this way, but this cetain call is a NON-DID number, a non-routable PSTN number internal only. The pattern exists in 2 different partitions. ANy ideas what would cause a RL to be BUSY ?
CCM|RouteListCdrc::null0_CcSetupReq - Terminating a call after the RouteListCdrc cannot find any more device.
CCM|RouteListCdrc::terminateCall - No more Routes in RouteListName = RL-BBT. Rejecting the call
CCM|RouteListCdrc::terminateCall - Sending CcRejInd, with the cause code (34), to RouteListControl because all devices are busy/stopped.|
CCM|RouteListCdrc::terminateCall - Sending CcRelInd, with cause code (41), to Cc because it has sent CcRegisterPartyB to Cc
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.