Call Manager TTrunk to Ericsson MD-110 via PRI ISO QSIG E1 Caller ID Name Problem
I have sucessfully interconnected a Call Manger Ver 184.108.40.20600-6 with 3 diffrent PBXs via a MGCP gateways using a 1MFT1E1 cards
The protocol used in all of them is Qsig all calls are routed sucessufly between call manager and all the PBXs. But the Caller ID Name facility does not pass between Ericsson PBX and other configured PBX's. between the other 2 PBXs (Simens Hipath) configured in the same way and the Caller ID Name is passed sucessfuly, but not to or from the Ericsson PBX. The Qsig Variant is ECMA. a isd q931 debug shows the facility name is beeing delivered to the PBXs.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.