Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call Park Length - Unified CM 7.1

Hello. A quick question regarding call park in v.7.1. How can I extend the length of time that a call can be parked? on v4 we had 3 minutes approx, however right now on 7.1 we are only at 1 minute. Thanks for your help.

3 REPLIES
Hall of Fame Super Red

Re: Call Park Length - Unified CM 7.1

Hey Rob,

I was just looking at this recently :)

Call Park Reversion

Call Park Reversion Timer - Default specifies 60 seconds. This parameter determines the time that a call remains parked. Set this timer for each server in a cluster that has the Cisco CallManager service and call park configured. When this timer expires, the parked call returns to the device that parked the call.

--------------------------------------------------------------------------------

Note: To set the timers, choose System > Service Parameters and update the Call Park Display Timer and the Call Park Reversion Timer fields in the Clusterwide Parameters (Feature-General) pane.

From this good doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00806b7ecb.html

Hope this helps!

Rob

New Member

Re: Call Park Length - Unified CM 7.1

Thanks for your quick response...do you know, will this reset the phones?

Hall of Fame Super Red

Re: Call Park Length - Unified CM 7.1

Hi Rob,

You are most welcome my friend! This will not reset the IP Phones.

Cheers!

Rob

127
Views
0
Helpful
3
Replies