Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Call Pickup on VG224

Hello Folks

I have a query regarding VGs configured using SCCP and calling features.

We have local group pick up configured (ie: pickup local **1) - when the phones ring and the user goes off-hook and enters the pick up code the call isn't picked up right away. Instead, when the user replaces the handset the phone rings and the call is picked up when the user goes off-hook.

Is this normal behaviour for pick-up on a VG?

Also, does anyone know of a document detailing end user guides or operations manual for these calling features - I have looked high and low!

many thanks!

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Red

Call Pickup on VG224

Hi Graham,

Can you please let us know what IOS the VG's are running as there was a bug

that caused this type of behavior back in the 12.4 train.

This doc does describe the use of these features pretty well

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.pdf

Cheers!

Rob

Please remember to tag your threads and help support "Teachers without Borders"

https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity

Green

Re: Call Pickup on VG224

Hi,

This sounds like the following paremater has not been set in the CUCM Call manager service

AutoCallPickupEnabled

must be set to True.

Regards

Alex

Regards, Alex. Please rate useful posts.
3 REPLIES
Hall of Fame Super Red

Call Pickup on VG224

Hi Graham,

Can you please let us know what IOS the VG's are running as there was a bug

that caused this type of behavior back in the 12.4 train.

This doc does describe the use of these features pretty well

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.pdf

Cheers!

Rob

Please remember to tag your threads and help support "Teachers without Borders"

https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity

Green

Re: Call Pickup on VG224

Hi,

This sounds like the following paremater has not been set in the CUCM Call manager service

AutoCallPickupEnabled

must be set to True.

Regards

Alex

Regards, Alex. Please rate useful posts.
New Member

Call Pickup on VG224

Thanks, Guys.

Yes, the AutoCallPickupEnabled did the trick.

Also, thanks Rob for the stcapp resource - I missed that on the CCO. Cheers!

387
Views
0
Helpful
3
Replies
CreatePlease to create content