Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Call Progress Tones

Hi Guys,

Have a situation when calling in from the pstn the calling party does not hear the destination phone ringing but only them pick up.Added the voice call send-alert which sorted that out but it is still happening on internal calls between extensions....Any ideas

1 REPLY
Silver

Re: Call Progress Tones

In order to resolve this issue, set the Disable Alerting Progress Indicator service parameter to False in Cisco CallManager. This can be done when you log into the Cisco CallManager Admin page and complete these steps:

Go to the Service menu and select Service Parameters from the Cisco CallManager Administration page.

Choose the Publisher CallManager Server and Cisco CallManager service.

Scroll down to Disable Alerting Progress Indicator from the Clusterwide Parameters (Device - PRI and MGCP Gateway) section. Set this parameter to False and click Update.

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094c33.shtml#ringback_pstn

http://www.cisco.com/en/US/products/hw/switches/ps2246/products_configuration_guide_chapter09186a00800ea889.html

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080111b80.shtml#fourth

177
Views
0
Helpful
1
Replies
CreatePlease to create content