hi, i have three sites using CCM 6.1 and i also have a voice recording solution on each site. Two of the sites are recording all calls ( internal and external) but the other site is only recording internal calls only. I checked the configs on the switches and i cannot find anything wrong there but when i check on the configs of the routers this config ( boot system flash:c2800nm-ipvoicek9-mz.124-9.T.bin)is missing on the router that is only recording internal calls. Can this missing config be the issue or what might be the issue. thanks.
The boot command will probably be unrelated to this problem - it determines which software the gateway should boot. If it's not present, then the gateway will boot the first image it finds in flash.
You may want to do a 'show version' to verify the same software is running.
Most recording solutions operate using SPAN - the LAN switches mirror traffic from specific ports or VLANs back to a central port where your call recording server is connected. The server then sniffs the mirrored traffic.
It may be that the gateway on the site that is not working is not being SPANned back to the recording server.
Please rate helpful posts...
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Thanks Aaron, the LAN switches are configured correctly because it can record internal calls ( meaning i'm not going out using the gateway). How do u SPAN the gateway back to the recording server bcos i suspect this is not being done.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...