Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Call Rejection Error

On one of my PRI's we have a few numbers assigned to dial in.  One of the assigned numbers is giving us the error "Your call cannot be completed as dialed, please check the number and try again - Zero Zero Four T".  All of the other numbers are working.  The phone company is saying our phone system is rejecting the call.  To my knowledge though, if our phone system was rejecting the call, I should be getting a call manager error.  I think the phone company is wrong, but I dont know how to prove this.  Does anyone know?

Everyone's tags (2)
4 REPLIES
Hall of Fame Super Silver

Call Rejection Error

This does sound like CUCM annouciator error. Can you capture "debug isdn q931" debug for this call?

Chris

New Member

Call Rejection Error

The error I stated above is the error I get when I dial the number from an outside line.

Hall of Fame Super Silver

Call Rejection Error

Understood, still possible if nothing matches within CUCM.

Chris

Call Rejection Error

The advice Chris gave you is the best way to troubleshoot this problem. You will be able to see if the call gets to your gateway and, if it does, the reason why it is not getting through to CallManager.

The links below will help you to use the debug q931 feature

http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a0080093c1a.shtml

http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml

250
Views
0
Helpful
4
Replies
CreatePlease to create content