Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Call routing based on time frames

Hello,

I have the following requirement. I want to configure the max-conn an incoming called-number may have based on a certain time frame. Something like the below(This is more dialpeer matching based on configured time). I know that its not possible like this, but I was hoping there is another way to achieve something similar.

dial-peer voice 1000 voip

timeframe 08:00:00 10:00:00

max-conn 10

incoming called-number 123456789

dial-peer voice 1001 voip

timeframe 11:00:00 17:00:00

max-conn 2

incoming called-number 123456789

If it is possible in some way, which IOS and CallManager(Express) do I need?

Thanks,

Grant

3 REPLIES
Hall of Fame Super Silver

Call routing based on time frames

Grant,

The only time of day routing in CME I am aware of is after-hours call blocking future:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmead.pdf

HTH,

Chris

Hall of Fame Super Gold

Call routing based on time frames

What is the purpose of this, what the numbers have to be, what's the call-flow / operating need ?

Community Member

Call routing based on time frames

We are developing a call forwarding application based on time frames. Each time frame has a maximum amount of

simultaneous calls. The numbers are 0800 numbers and 0900(premium rate in Holland).

I specifically need something which has the ability to control the maximum connections allowed for a given timeframe and phonenumber. I already have some solutions, but these require me to code. I was just wondering if there is something like this already implemented by cisco in callmanager(express) or somewhere else.

371
Views
0
Helpful
3
Replies
CreatePlease to create content