Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call Routing by Calling Number

Hi

Someone configurated call routing based on the calling number with CallManager 5.x? I need to distinguish between destination gateways(H.323) based on origin.

Thanks

Peterson

3 REPLIES
Hall of Fame Super Gold

Re: Call Routing by Calling Number

Ola' Peterson,

For example:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

Concept is the same, just reversing Dial-peer types. You can also achieve the same using COR, and no number manipulation.

New Member

Re: Call Routing by Calling Number

Ola' Paulo

Sorry, give-me explain better

The customer has various sites (example A,B,C,D), with centralized callmanager cluster. A site (B) lost the wan connection, so the extensions is unregistered on CCM. This phone is configured with CSS on Forward Unregistred on CallManager.

So I want that when another site calls the phones on site B (unregistered), the calls send to PSTN by gateway on local site by PSTN

Thanks

Peterson

Hall of Fame Super Gold

Re: Call Routing by Calling Number

In that case I think you have to use partitions and route lists, but I'm not a CM expert.

173
Views
0
Helpful
3
Replies