I was looking for some suggestions for a scenario that I'm looking to implement. I need the off-net inbound calls to a certain group of phones directly to go to Voicemail. But the users within the group should be able to call each other. I'm using MGCP at the Gateway.
configure a CTI route point with CFA to VM that matches the set of DNs, something like 25XX or whatever you have and have the partition from that CTI under the inbound CSS of the GW but not the real partition of the phones so they can can each other without having to be CFA to VM
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...