Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

call transfer in 7940

I have dual-line mode configured in a IP phone 7940 so when you are speaking and a new call comes you can see in the screen the call and the number. Then I answer the second call holding the first and try to transfer the new call to another extension but it's not posible.

Why I cannot transfer a second call when the first call is active?

What I have to do to fix that problem?

7 REPLIES
Hall of Fame Super Gold

Re: call transfer in 7940

Well, this is kind of interesting.

I understand that you can't do a full-consult transfer on the second call, because both lines are taken already. However, the transfer should work in blind mode. I will try this at the office tomorrow.

Re: call transfer in 7940

What is the value for maximum no. of calls in phone configuration

Hall of Fame Super Gold

Re: call transfer in 7940

One for single-line, two for dual-line ephone-dn. This is an area where CM does a lot more than CME:

http://cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801f3b4e.shtml

New Member

Re: call transfer in 7940

So what I have to do for transfering the second incoming calls?

Changing transfer-system to blind?

The call-forward busy is not running too in the 7940 Why ?

This is the config I have:

!

telephony-service

max-ephones 18

max-dn 20

ip source-address 192.168.3.1 port 2000

auto assign 1 to 18

user-locale ES

network-locale ES

create cnf-files version-stamp Jan 01 2002 00:00:00

max-conferences 4 gain -6

moh en_bacd_music_on_hold.au

transfer-system full-consult

!

!

ephone-dn 1 dual-line

number 107 no-reg primary

name Angel Gallardo

!

!

ephone-dn 2 dual-line

number 101 no-reg primary

name Nuria Font

!

!

ephone-dn 3 dual-line

number 102 no-reg primary

name Jose Seijas

!

!

ephone-dn 4 dual-line

number 103 no-reg primary

name Oscar Pinto

!

!

ephone-dn 5 dual-line

number 104 no-reg primary

name Pepe Gallardo

!

!

ephone-dn 6 dual-line

number 105 no-reg primary

name Pablo Castell

!

!

ephone-dn 7 dual-line

number 106 no-reg primary

name Bea

!

!

ephone-dn 8 dual-line

number 100 no-reg primary

name Raquel

call-forward busy 106

Hall of Fame Super Gold

Re: call transfer in 7940

Hi,

I couldn't test this yet, people at my office is busy doing other things. Will let you know as soon I have a chance.

Hall of Fame Super Gold

Re: call transfer in 7940

I managed to test this with a 7941. It is as I supposed, the second call will be transferred in blind mode because the limitation to two active calls.

New Member

Re: call transfer in 7940

I have changed it but the problem continues, I cannot transfer the second incoming call. I have changed the transfer-system to blind and full-blind, but everything continues equal. Is it necesary restart the telephone system or the IP phone?

this is my config now:

telephony-service

max-ephones 18

max-dn 20

ip source-address 192.168.3.1 port 2000

auto assign 1 to 18

user-locale ES

network-locale ES

create cnf-files version-stamp Jan 01 2002 00:00:00

max-conferences 4 gain -6

moh en_bacd_music_on_hold.au

transfer-system full-blind

!

!

ephone-dn 1 dual-line

number 107 no-reg primary

name Angel Gallardo

!

!

ephone-dn 2 dual-line

number 101 no-reg primary

name Nuria Font

473
Views
0
Helpful
7
Replies