Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call transfer to a mobile / landline

Having an odd issue. CCME.

<br />

<br />I can consultativley transfer internally fine, no problem.

<br />

<br />As soon as I want to transfer a call to an outside line (Transfr, 9, then number) I immediatley get the number not recognised beeps.

<br />

<br />What would I be missing? All my dial peers work, so 9 then a number works fine.

<br />

<br />This doesnt even attempt to process the number, it just stops as soon as it see's the 9 being input.

<br />

Here are my dial peers for reference:

dial-peer voice 1 pots

destination-pattern 920......

port 0/0/0:15

forward-digits 6

prefix 20

no sip-register

!

dial-peer voice 2 pots

description **Answers All Incoming Calls**

incoming called-number .

direct-inward-dial

port 0/0/0:15

!

dial-peer voice 3 pots

description ** Outbound International Call **

preference 1

destination-pattern 900T

port 0/0/0:15

prefix 00

no sip-register

!

dial-peer voice 4 pots

description ** Outgoing national landline / mobiles **

preference 10

destination-pattern 90[1-7].........

port 0/0/0:15

forward-digits 11

no sip-register

!

dial-peer voice 5 pots

description ** Outgoing Short length 0800 number **

preference 9

destination-pattern 908T

port 0/0/0:15

prefix 08

no sip-register

!

dial-peer voice 6 pots

destination-pattern 90[1-7]........

forward-digits 10

!

!

1 REPLY
New Member

Re: Call transfer to a mobile / landline

doh, missed out transfer-pattern 9T. works a treat now

204
Views
0
Helpful
1
Replies
CreatePlease login to create content