Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Call transfers through ICT trunk not working

Hi,

 

i am doing a parallel migration from CUCM 7 to CUCM 9. i have an ICT trunk between the systems, but call transfers through the trunk doesnt seem to work.

 

can any give some guidance.

 

thanks,

Surendra

2 ACCEPTED SOLUTIONS

Accepted Solutions

Do you have MRGL configured

Do you have MRGL configured on the trunks with MTP & MOH? What type of trunk you have configured between cluster? Direct calls between these clusters are working fine? Are you able to hold /resume this intercluster call?
//Suresh Please rate all the useful posts.

Thanks for the update

Thanks for the update Surendra. Good to know the issue is fixed. //Suresh Please rate all the useful posts
//Suresh Please rate all the useful posts.
4 REPLIES

Do you have MRGL configured

Do you have MRGL configured on the trunks with MTP & MOH? What type of trunk you have configured between cluster? Direct calls between these clusters are working fine? Are you able to hold /resume this intercluster call?
//Suresh Please rate all the useful posts.
New Member

HI Suresh, thanks for your

HI Suresh,

 

thanks for your response, my issue was resolved. MTP was  the source of my issue :)

Thanks for the update

Thanks for the update Surendra. Good to know the issue is fixed. //Suresh Please rate all the useful posts
//Suresh Please rate all the useful posts.
Cisco Employee

hello Surendra, Is your ICT

hello Surendra,

 

Is your ICT trunk between CUCM7 and CUCM9? can elaborate the transfer flow ?

Did you collected the ccm traces ?

 

Br,

nadeem

Br, Nadeem Please rate all useful post.
68
Views
2
Helpful
4
Replies
CreatePlease to create content