Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Called Party Text String

Hi,

we append a 5 digit code to all mobile numbers dialed within the Route Pattern in order to get a reduced tariff over the mobile phone network.

The calling party then sees the mobile number with the 5 digits appended as the called number on their Cisco handset. Is there a way of stripping the 5 digits so that the original mobile number (11 digits) shows as the number called on the Cisco handset as some of our users are perplexed when they see the number displayed is not the number they called ie 5 digits + the mobile number?

Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Called Party Text String

You can either strip digits by configuring the Incoming Prefix service parameters in the Service Parameters window or by configuring the Strip Digits fields in the Device Pool, Gateway, or Trunk Configuration windows.

1 REPLY
Bronze

Re: Called Party Text String

You can either strip digits by configuring the Incoming Prefix service parameters in the Service Parameters window or by configuring the Strip Digits fields in the Device Pool, Gateway, or Trunk Configuration windows.

94
Views
0
Helpful
1
Replies