Caller Id don't work on Cisco VG

[fredericmoitie]

Hello,

An Analog Phone with Display is connected to a VG224.
When someone (external or internal) is calling the Analog Phone no Caller ID is visible on the Analog Phone.

Caller ID Enable on VG224 is set.

The VG224 has IOS 12.4(20r)YA1

CUCM Version 7.1.5.31900-3
VG224 is configured as SCCP

When i call from the Analog Phone to IP Phone everything is fine.

voice port configuration :

voice-port 0/0

cptone FR

timeouts initial 60

timeouts interdigit 60

timeouts ringing infinity

caller-id enable

Thanks for Help

[Jorge Armijo]

Try with the most basic configuration on the voice-port first:

voice-port 0/0

no cptone FR

no timeouts initial 60

no timeouts interdigit 60

timeouts ringing infinity

caller-id enable

sh

no sh

If that doesn't work, please update IOS and try again.

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

[fredericmoitie]

hi

i try

voice-port 0/0

no cptone FR

no timeouts initial 60

no timeouts interdigit 60

timeouts ringing infinity

caller-id enable

sh

no sh

but same problem

i update with last version in 12.4

but same problem

regards

[Hythim Ali El Hadad]

Version 15.0 will solve your issue isa

Regards

Haitham

[fredericmoitie]

Hi

same problem :-(

regards