cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
397
Views
0
Helpful
4
Replies

Caller ID for H.323 Gateway

Hi,

I'm  trying to make it funcitonal  caller ID service for our Cisco IP Telehphony for Saudi Arabia.

We are using 2821 router with analog interface. Router is running Cisco CME 7.1 and IOS is "c2800nm-advipservicesk9-mz.124-24.T". Caller ID is activated from service provider and it is working fine on normal analog phone. All voice ports are configured basic command "caller id enable", but none of the IP Phones are not  appearing.

Please help me to get it work.

Thanks

Firose

4 Replies 4

paolo bevilacqua
Hall of Fame
Hall of Fame

Which cptone have you configured under voice-port ?

I tried SA and BR..

It may a bug in DSP firmware, for which you would have to update IOS, or DSP FW (not available to the public).

dksingh
Cisco Employee
Cisco Employee

Is it the caller ID name or number that is not showing up on IP phone or both ?

Can u capture following debugs for one call and attach it along with GW config?

deb vpm sig

deb voip ccapi inout

Its possible that we may need to tweak the voice port config a bit to get the caller

ID to work correctly.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: