Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Caller ID in SIP diversion field

I am trying to send caller id info from CUCM to ITSP SIP trunk.

I have a CUBE between ITSP and CUCM

In the SIP messages my caller id  info is showing in the FROM and P-ASSERTED fileds

However this ITSP requires me to use the DIVERSION field.

When i do my Debugs ccsip i dont even see the DIVERSION field.

How can we populate this field to be the same then my FROM or P-ASSERTED field ?

I do not want a static DIVERSION field

The DIVERSION would have to be dynamic like the FROM or P-ASSERTED fields

Thank you for any insight

Below part of my debug and my only SIP profile and my only dial peer to ITSP

**************************************************

!

voice class sip-profiles 416

request INVITE sip-header P-Asserted-Identity modify ">" ";user=phone>"

request INVITE sip-header Diversion modify "@.*>" "@siptrunking.bell.ca;user=phone>"

request INVITE sip-header From modify ">" ";user=phone>"

request INVITE sip-header SIP-Req-URI modify "172.99.99.99" "siptrunking.bell.ca"

request INVITE sip-header Contact modify "@" ";tgrp=tor_01_416XXXXXXX;trunk-context=siptrunking.bell.ca@"

!

**********************************************************

!

dial-peer voice 120 voip

description outgoing leg to SIP trk using trunk 416

translation-profile outgoing remove9

destination-pattern .T

session protocol sipv2

session target ipv4:172.X.X.X

voice-class codec 1

voice-class sip profiles 416

dtmf-relay rtp-nte

ip qos dscp cs5 signaling

no vad

!

**************************************************************

*Mar  3 19:12:00.817: //129882/FF4D14000000/SIP/Msg/ccsipDisplayMsg:

Sent:

INVITE sip:41655512346@siptrunking.bell.ca:6179 SIP/2.0

Via: SIP/2.0/UDP 172.99.99.99:6179;branch=z9hG4bK10DC150A

From: "Jon Do" <sip:4161112222@cube.enterprise.com;user=phone>;tag=63111EB4-2317

To: <sip:4163334444@172.33.22.11>

Date: Mon, 03 Mar 2014 19:12:00 GMT

Call-ID: 187770F2-A23E1113-8300A51A-DECF6548@cube.enterprise.com

Supported: 100rel,timer,resource-priority,replaces,sdp-anat

Min-SE:  1800

Cisco-Guid: 4285549972-0000065536-0009000027-0141118188

User-Agent: Cisco-SIPGateway/IOS-15.2.4.M4

Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER

CSeq: 102 INVITE

Timestamp: 1393553920

Contact: <sip:5142225555;tgrp=tor_01_4165145232;trunk-context=siptrunking.bell.ca@172.88.99.99:6179>

Expires: 60

Allow-Events: telephone-event

Authorization: Digest username="xxxxx...

Max-Forwards: 68

Session-Expires:  1800

Content-Type: application/sdp

Content-Disposition: session;handling=required

Content-Length: 250

Everyone's tags (3)
2 REPLIES

Caller ID in SIP diversion field

Have you enabled "Redirecting Diversion Header Delivery - Outbound" on the sip trunk?

//Suresh Please rate all the useful posts.
New Member

Caller ID in SIP diversion field

Yeah i did but it on Outbound, its one of the first thing i checked.

I was thinking theres maybe some other place, some other setting to enable Diversion field

315
Views
0
Helpful
2
Replies