Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Caller ID Issue

We interfaced the CM to our Avaya G3R PBX and I can call my Avaya phone from the CM and get the name and number but calling the other way I get the station number only.

The other issue is when I go to the directory and looked at missed calls, aren't we supposed to be able to hit dial and call that outside number? I hit dial and I get a four digit station number at our location.

4 REPLIES
Green

Re: Caller ID Issue

CM to our Avaya G3R PBX and I can call my Avaya phone from the CM and get the name and number but calling the other way I get the station number only.

Using what type of integration? Q.SIG, T1 CAS ?

Please let us know

New Member

Re: Caller ID Issue

Thanks for your help.

I am using a T1 ISDN service type cbc

Hall of Fame Super Red

Re: Caller ID Issue

Hi Abbas,

For the second part of your question; using the "dial softkey" from the Missed Calls Directory;

Add Prefix to a Missed Call

If the calls from a Cisco IP phone fail when the Dial softkey is selected on "missed calls" it is beacuse the calling number does not include the required prefix for outside dialing (usually 9), you can use the solutions mentioned in this section in order to resolve this issue.

From this good tech note;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml

Hope this helps!

Rob

New Member

Re: Caller ID Issue

You need a crossover T1 line cable.

146
Views
0
Helpful
4
Replies