hello everyone,
i have CME with 4 analog lines. i have caller id enabled from the provider but not able to get it on the IPphones.
iam usin the followin version of IOS:
(C2801-ADVENTERPRISEK9-M), Version 12.4(15)T1
iam also adding config of one of the voice ports:
!
voice-port 0/0/1
supervisory disconnect dualtone mid-call
ring number 3
input gain 14
timeouts call-disconnect 5
timeouts wait-release 5
timing hookflash-out 50
connection plar opx 500
caller-id enable
!
any suggestions????????????
