Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Caller id name on a PSTN call

Hi,

Does anybody knows if I can configure a callmanager 4.1 to display an special caller id name when I receive a PSTN call?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Caller id name on a PSTN call

Yes. Check anyway that QSIG is not mandatory for calling name, PBX could be using display Information Element.

3 REPLIES
Hall of Fame Super Gold

Re: Caller id name on a PSTN call

If you use H.323, you could use a TCL/IVR script that I wrote:

http://pbevila.fastmail.fm/public/

number2name, there are two varieties, one has HTTP query support, the other a more robust logic, I shall reunify them someday.

New Member

Re: Caller id name on a PSTN call

Hi Paolo,

Thanks for your response.

My case is this: My customer is using an Ericcsson PBX and a CallManager but the Ericcsson does not have suplementary QSIG support and does not send the name asociated with the caller id.

My customer is asking if we can do something to match de CLID that we receive with the name asociated with this number to display it on the ip phones.

According to this, the TCL script works?

Thanks again

Hall of Fame Super Gold

Re: Caller id name on a PSTN call

Yes. Check anyway that QSIG is not mandatory for calling name, PBX could be using display Information Element.

162
Views
0
Helpful
3
Replies
CreatePlease login to create content