Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Caller-ID on digital E&M T1

First time setting up an SRST router. I have everything working but I am not getting any caller-ID. Phone reads UNKNOWN and the status on the router shows:

May 24 20:04:30.926: //-1/80ED7877826D/DPM/dpMatchPeersCore:

   Calling Number=, Called Number=8136, Peer Info Type=DIALPEER_INFO_SPEECH

May 24 20:04:30.926: //-1/80ED7877826D/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=8136

May 24 20:04:30.930: //-1/80ED7877826D/DPM/dpMatchPeersCore:

   Result=Success(0) after DP_MATCH_DEST

May 24 20:04:30.930: //-1/80ED7877826D/DPM/dpMatchSafModulePlugin:

   dialstring=8136, saf_enabled=1, saf_dndb_lookup=1, dp_result=0

May 24 20:04:30.930: //-1/80ED7877826D/DPM/dpMatchPeersMoreArg:

   Result=SUCCESS(0)

   List of Matched Outgoing Dial-peer(s):

     1: Dial-peer Tag=3

     2: Dial-peer Tag=2

Sh controller T1:

T1 0/0/0 is up.

  Applique type is Channelized T1

  Cablelength is long 0db

  No alarms detected.

  alarm-trigger is not set

  Soaking time: 3, Clearance time: 10

  AIS State:Clear  LOS State:Clear  LOF State:Clear

  Version info Firmware: 20100222, FPGA: 13, spm_count = 0

  Framing is ESF, Line Code is B8ZS, Clock Source is Line.

  CRC Threshold is 320. Reported from firmware  is 320.

  Data in current interval (460 seconds elapsed):

     0 Line Code Violations, 0 Path Code Violations

     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

sh voice port summ

                                           IN       OUT

PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC

=============== == ============ ===== ==== ======== ======== ==

0/0/0:0         01  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         02  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         03  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         04  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         05  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         06  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         07  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         08  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         09  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         10  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         11  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         12  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         13  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         14  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         15  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         16  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         17  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         18  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         19  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         20  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         21  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         22  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         23  e&m-wnk     up    dorm idle     idle     y

0/0/0:0         24  e&m-wnk     up    dorm idle     idle     y

50/0/1          1      efxs     up    up   on-hook  idle     y

50/0/1          2      efxs     up    up   on-hook  idle     y

50/0/2          1      efxs     up    up   on-hook  idle     y

50/0/2          2      efxs     up    up   on-hook  idle     y

50/0/3          1      efxs     up    up   on-hook  idle     y

50/0/3          2      efxs     up    up   on-hook  idle     y

50/0/4          1      efxs     up    up   on-hook  idle     y

50/0/4          2      efxs     up    up   on-hook  idle     y

50/0/5          1      efxs     up    up   on-hook  idle     y

50/0/5          2      efxs     up    up   on-hook  idle     y

50/0/6          1      efxs     up    up   on-hook  idle     y

50/0/6          2      efxs     up    up   on-hook  idle     y

50/0/7          1      efxs     up    up   on-hook  idle     y

50/0/7          2      efxs     up    up   on-hook  idle     y

50/0/8          1      efxs     up    up   on-hook  idle     y

50/0/8          2      efxs     up    up   on-hook  idle     y

50/0/9          1      efxs     up    up   on-hook  idle     y

50/0/9          2      efxs     up    up   on-hook  idle     y

50/0/10         1      efxs     up    up   on-hook  idle     y

50/0/10         2      efxs     up    up   on-hook  idle     y

PWR FAILOVER PORT        PSTN FAILOVER PORT

=================        ==================

Any help on this?

THANKS!

Everyone's tags (4)
422
Views
0
Helpful
0
Replies