Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Caller ID on SIP Phones?

Hello

We have a client using CME and they have 50 VOIP phones and 5 SIP phones registered with the CME Router.

We have updated the labels and names on two of the SIP phones but when calling another phone, the Caller ID is still the old one.

voice register dn  3

number 454

allow watch

name New_Name

no-reg

label New_Name

!

voice register dn  5

number 733

name New_Name

no-reg

label New_Name

Am I missing something?

The Calling Number which is displayed when calling one of the VOIP phones should be the 'Name' listed above right??

Thanks

3 REPLIES

Caller ID on SIP Phones?

On sip it will take the name you put on the sip  pool.

Please Kudos/rate if this help!

Please Kudos/rate if this help!

Re: Caller ID on SIP Phones?

Hi.
To apply changes to register pools go to register global and issue create profile or under pool "apply-config"

HTH

Regards

Carlo


Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"

Caller ID on SIP Phones?

Hi Both

Thanks for your suggestions, under the #Voice Register Pool X config mode, the only thing which looks like it might pertain to the name is 'Description'.....is this what needs to be added?

Thanks

FYI Carlo - I have recreated the SIP configs using the Create Profiles command under the Voice Register Global but this was only after adding the name and label as mentioned in the original post but this didn't update anything. Presumably it has to be done on the pools as mentioned by Jose.

134
Views
0
Helpful
3
Replies
CreatePlease to create content