08-17-2014 07:34 PM - edited 03-16-2019 11:46 PM
Hi,
We have two call manager cluster one is 7.0 and other one is 10.0
Both are connected by SIP trunk, But when someone from 7.0 calls a phone on 10.0 only number is dispalyed.
I also want name to be displayed along with number.Any idea how to enable this feature
08-17-2014 07:45 PM
08-17-2014 07:47 PM
We only recommend sip trunks for CUCM communication if all the servers are 8.6 and above, if there is a server below 8.6, we recommend the old non-GK ICT
08-17-2014 10:12 PM
So this feature will not work...
Actually we are migrating to 10.x but there are number of sites ..Till then we have some sites in 7.x and some in 10.x
i was looking for some solution for caller id betwwen two
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide