Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Caller ID on SIP Trunk

Hi,

 

We have two call manager cluster one is 7.0 and other one is 10.0

Both are connected by SIP trunk, But when someone from 7.0 calls a phone on 10.0 only number is dispalyed.

I also want name to be displayed along with number.Any idea how to enable this feature

3 REPLIES
Hall of Fame Super Gold

Duplicate post.  Go here:

Cisco Employee

We only recommend sip trunks

We only recommend sip trunks for CUCM communication if all the servers are 8.6 and above, if there is a server below 8.6, we recommend the old non-GK ICT

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

So this feature will not work

So this feature will not work...

Actually we are migrating to 10.x but there are number of sites ..Till then we have some sites in 7.x and some in 10.x

i was looking for some solution for caller id betwwen two

 

86
Views
0
Helpful
3
Replies
CreatePlease to create content