Restriction tables allow you to control which phone numbers subscribers and administrators can use for:
Transferring calls?including both the numbers subscribers can enter for transferring their calls, and the numbers that unidentified callers can enter when using Caller system transfers. Recording and playback by phone from Cisco Unity applications, when the phone is the designated recording and playback device in the Media Master. (The Media Master is available in the Cisco Unity Administrator, the Cisco Unity Assistant, the Cisco Unity Inbox, and ViewMail.)
Delivering faxes to a fax machine.
Sending message notifications.
Sending AMIS messages.
For example, you can specify that subscribers have calls transferred only to internal extensions or that faxes are delivered only to local phone numbers. Restriction tables are applied regardless of how a subscriber or administrator accesses Cisco Unity.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...