Re: CallerID dissapears when transferring outside call
This is happening with recent CME and I'm not sure if there is a bug filed, or a configuration workaround. The correct behavior is to show both the caller and the transferrer number so one could tell right that is receiving a call for transfer.
If it is as issue for (I guess it is) please open a case with the TAC. Eventually, we can go back to find the last release were this worked as supposedly has to.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...