Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CallerID problem from PSTN(FXO)

Hi,

I have a very strange problem with callerID from my PSTN.

The lines from the PSTN is connected to a vic2-4fxo card with NM-HD-2VE.

I used MGCP for CCM.

PSTN has callerID enabled.

But the line is placed on the fxo, it does not display on the IP phones.

When I connected PSTN line to a analog phone, I get callerID displayed on the the analog phone.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CallerID problem from PSTN(FXO)

caller ID on FXO is not supported using MGCP, if you want called ID you need to switch to H323

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1 REPLY
Cisco Employee

Re: CallerID problem from PSTN(FXO)

caller ID on FXO is not supported using MGCP, if you want called ID you need to switch to H323

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
188
Views
0
Helpful
1
Replies