Calling and Called Party Transformation Pattern Behaviour
Hi experts, need your help to understand and made it work the following.
I was trying to work with:
- Calling Party Transformation Pattern for GW egress calls
- Called Party Transformation Pattern for GW Ingress calls
First please let me know if these are possible or not? IF possible, how to configure? I configured Calling Party Transformation Pattern for ingress calls and working great as expected, also configured Called Party Transformation Pattern for egress calls but I was trying to implement the opposite exactly explained on the example on SRND page 10-17 and 10-18, but failed to work the Calling Party Transformation Pattern for any outgoing calls.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...