We have made a fiber connection with another company that has a cucm server. I would like to be able to call their 4 digit extensions without having to dial a 7 digit number to reach them. Can it be possible to created a dial pattern to accomplish this or is this not possible?
I currently have a SIP trunk connection with a Siemens 4k switch that is sending calls between each other. Now we are wanting to send the traffic from another CUCM over the fiber connection through our CUCM and over the SIP trunk to the Siemens 4k. I am happy that is can be done, just need to find the right route pattern to make this happen.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...