calling-info pstn-to-sip issue with two SIP-trunks, CME
I got a Cisco CallManager Express (c2800nm-spservicesk9-mz.124-24.T3.bin), Version 7.1 with two SIP-trunks.
One to the SIP-VoIP-Provider and the other one to a third-party VoiceMail.
The SIP-registration to the VoIP-Provider needs the "calling-info pstn-to-sip from number set <registration nr.>" under the sip-ua configuration, because the registration-nr. isn't the same as the "real" DID-nr. range.
Unfortunately, the second trunk uses this setting as well and the VoiceMail can't figure out the origin caller-id (it's checking only the from header an not
Who has such a setup and how can it be done to set the SIP From: information only for one trunk. I use transation-rule for mapping the internal
phone-nr. to the DID-range. This change only affect to the P-Preferred-Identity number.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.