that certainly is not from CUCM, what kind of GW? MGCP? H323? CUCM version?? and most important thing, what does the telco expects??? if you don't know give them a call, some expect certain info sent to accept calls
might sound stupid but can you call the number from any other phone???
i ask because one time someone opened a TAC with me and the issue was the number was wrong =)
I agree with Jaime, this sounds like something from the provider. I know for a fact that if your PRI is on a 4ess switch, they generally do not want the leading 011 on international calls, and the called party plan type needs to be set to international in order for the call to go through. But check with your provider and they will tell you exactly what they need to see on international calls.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...