Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Calling Name from voice gateway

I have a situation where I have many branch office voice gateway fxo's are configured via plar commands to transfer incoming calls to a central operator. All the voice gateways are h323.

The problem I have is the operator does not know where they call originated from and therefore does not know the best person to xfer the call to.

I would like to label these calls with a name per originating gateway or port so that calls that come in through branch1 are displayed Branch 1 at the attendant console.

Is there a way to do this?

Thanks,

Michael

2 REPLIES
Green

Re: Calling Name from voice gateway

Under the FXO port in the IOS GW try to add:

station-id name command

For exmaple:

voice-port 0/3/0

station-id name Line1

and see if that helps

Thanks

New Member

Re: Calling Name from voice gateway

No, that doesn't seem to work. No name is added to the caller id. All it seemed to do is when I make an outgoing call from that gateway to the PSTN, it reports back to my IP phone that I am calling "Line1"...

118
Views
0
Helpful
2
Replies
CreatePlease to create content