Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Calling Number = Unknown Number

Hi

I need hide the calling number of my customer to external call. How can I do it?

In a site I use CCM 5.x with voice gateway H323 and another site I use CCM 5.x with voice gateway MGCP.

Thanks

5 REPLIES

Re: Calling Number = Unknown Number

You need to do translations. On the H323 gateway, you can do the following:

voice translation-rule 1

rule 1 /calling number/ /number you want to send out/

voice translation-profile OUT

translate calling 1

voice-port x/x/x:23

translation-profile outgoing OUT

On the MGCP gateway, you can just change the external calling party mask to what you want to send out of the gateway.

New Member

Re: Calling Number = Unknown Number

So

I need that the clid show Private Number and not another number.

Re: Calling Number = Unknown Number

With translations, you have to replace a number with another number. If you want to have the numbers come up as private, I believe you have to contact your telco so they can make the numbers private.

Cisco Employee

Re: Calling Number = Unknown Number

you can use a translation pattern to intercept the call and use the settings:

Calling Line ID presentation and/or Calling Name presentation to block this

this are also available at the route pattern

as Kenneth mentions even if you set this sometimes the Telcos if you do not send this will fill the information with something else like the 1st number on the set of DIDs they assigned to you so it's a good idea to call the telco and see if they can do it for you, or if they can allow your settings to pass-thru unchanged

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Calling Number = Unknown Number

under route pattern, change the calling line id to "Restricted".

322
Views
0
Helpful
5
Replies