Facility i = 0x91AA068001008201008B0100A11302020100020102800A4575616E2057616C7368
Progress Ind i = 0xA194 - Reserved value
Connected Number i = 0x8095, '2', 0x0180, '6334' >>>>>> not sure why this is like this, never observed something like this.
I'm quite baffled as to why the calling party sees "London" instead of ANI+DNIS.
Even if I assume that the CNAME from FIE is being displayed that doesnt match either. I checked the FIE with a decoder and it says "MEHMET AKDAS". If the 2821's are swapped with Vangaurd routers everything works just fine. So I'm not sure if this is with some QSIG incompatibility between Cisco and PBX.
There isn't any compatibility matrix/sample test for Nortel CS1000M and Cisco using QSIG+H.323.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...