Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CallManager 4.0 - 7941 phone issue

I have a CallManager 4.0 and I'm trying to register some 7941 phones with it. I installed the Device Package and the Device load for 7945 but I still cannot find the 7941 as an option in the devices.

5 REPLIES
Hall of Fame Super Red

Re: CallManager 4.0 - 7941 phone issue

Hi Agelos,

Did you perform a cluster-wide reboot of you CCM servers? This is required when adding support for a new Device type.

Hope this helps!

Rob

New Member

Re: CallManager 4.0 - 7941 phone issue

Yes, i rebooted both the Publisher and Subscriber.

Hall of Fame Super Red

Re: CallManager 4.0 - 7941 phone issue

Hi Agelos,

What is your exact CCM 4.0 version and what was the Device-Pak that you installed?

Rob

New Member

Re: CallManager 4.0 - 7941 phone issue

The version is 4.0(1)sr2a and the device pack is 4.0(2a)sr2a, since this is the latest they have in the site.

Hall of Fame Super Red

Re: CallManager 4.0 - 7941 phone issue

Hi Agelos,

I do not see 4.0(2a)sr2a in the available Device-Paks for CCM 4.0. I believe for you to support the 7941 series with CCM 4.0 you will need the CCM release to be at a minimum of 4.0(2a)SR2 and this Dev-Pak;

Cisco Unified CallManager Device Package 4.0(46.4)

Release Notes Version 6

Compatibility Matrix and Supported Upgrades

This Cisco Unified CallManager Device Package release is compatible with the following Cisco Unified CallManager versions.

4.0(2a)SR2

Hope this helps!

Rob

140
Views
0
Helpful
5
Replies
CreatePlease login to create content