07-02-2008 01:34 PM - edited 03-15-2019 11:42 AM
I have a customer with 1 CM Pub and Sub on version 4.1(3). I added a second subscriber with the same exact version and SR patches. Problem I'm running into is in SQL Enterprise Manager, the replication fails and it complains of "COuld not find stored procedure "IsChangeNotifyReady"". I looked at the Pub and the stored procedure exists. Any ideas? Database names are the original CCM0300 across the board.
Solved! Go to Solution.
07-02-2008 06:08 PM
Hi Jonathan,
Have a look at these good docs;
Reestablishing a Broken CallManager Cluster SQL Subscription with Cisco CallManager
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801d11a6.shtml
Using DBLHelper to Reestablish a Broken Cisco CallManager Cluster SQL Subscription
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801e7ddf.shtml
Hope this helps!
Rob
07-02-2008 06:08 PM
Hi Jonathan,
Have a look at these good docs;
Reestablishing a Broken CallManager Cluster SQL Subscription with Cisco CallManager
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801d11a6.shtml
Using DBLHelper to Reestablish a Broken Cisco CallManager Cluster SQL Subscription
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801e7ddf.shtml
Hope this helps!
Rob
07-02-2008 06:44 PM
Yeah, saw the doc after I posted this. I reinitialized the db and restarted the risc data collector and that did the trick. thanks for the response...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide