Callmanager 5.1 - Change indicating tone for internal or external calls
Currently internal incoming call's ring tone is played in long ring, while external incoming call's ringing tone is played in short ring. Is it possible to swop them? so that we can hear short ring for internal, while long ring for external call.
Re: Callmanager 5.1 - Change indicating tone for internal or ext
The only way is called Call Classification. You can configure it on the CallManager Administration page at the gateway which connects the internal and the external location. It has two states (OffNet, OnNet). The states indicate that the calls coming from that gateway are offnet or onnet for the local network. So, if somebody from outside, calls your phone via that gateway you configured OffNet, you will hear a different ringing type than in the case of OnNet calls. Different ring type means the sequence and the length of the ringing, not different sound.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...