Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
paa
New Member

Callmanager 5.1 faststart in SETUP

Hello!

I have a strange problem with my AddPac200 (h323) and CCM 5.1. AddPac cann't establishe incoming call from CCM (no ringtone back to CCM). I try to debug AddPac and find that it cann't work using faststart with CCM. Call from AddPack to CCM work fine. Incoming/outcoming call from AddPack to C2811 work fine with faststart. If C2811 can work with AddPac, why CCM cann't?

1 REPLY
Silver

Re: Callmanager 5.1 faststart in SETUP

When a call is initially presented to RouteList CallManager will reroute on ANY cause code except Out Of Bandwidth, User Busy, and Unallocated Number. The rerouting decision for those cause codes is based on the CallManager service parameters Stop Routing on Out of Bandwitch,Stop Routing on User Busy, and Stop Routing on Unallocated Number.

Once RouteList locks onto a trunk it will not attempt any reroute. The best way to discern 'locks onto a trunk' is to look for media setup. Once media setup begins RouteList is locked on the current trunk and no additional rerouting will take place.

117
Views
0
Helpful
1
Replies
CreatePlease to create content