Is there anyway to have 6.1 callmgr prepend a digit(s) to the directory number.
Calls to inter-sites need to be dialed with a '91' in front of full e.164 extension number. I'm loooking for a way that when users use the phone's directory they can just hit the dial softkey to make call, without having to edit beforehand.
they will use translation patterns to allow intra-site 4-digit dialing. this would disallow call if for example user has 40xx range... user he wants to dial is at 4043642121. when he dials 4043 the above trans pattern will grab call and send him to 4043.
Reason is same as why its recommended to use access code(s).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...