Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

callmanager 6.1 with NM-HD-2VE=

after an upgrade from ccm 4.1 to 6.1 i noticed that my conference resources were not registered here is the running configuration question do i need to upgrade the ios ?

also where can i find the link to configuring sccp the old way and the new way?

sccp local FastEthernet0/0

sccp ccm 10.10.11.65 identifier 2 version 4.0

sccp ccm 10.10.11.64 identifier 1 version 4.0

sccp ip precedence 3

sccp

!

sccp ccm group 2

associate ccm 2 priority 1

associate ccm 1 priority 2

associate profile 2 register sat-vgw1-card2

!

sccp ccm group 1

associate ccm 2 priority 1

associate ccm 1 priority 2

associate profile 1 register sat-vgw1-card1

!

9 REPLIES
Cisco Employee

Re: callmanager 6.1 with NM-HD-2VE=

take out the version 4.0 from:

sccp ccm 10.10.11.65 identifier 2 version 4.0

sccp ccm 10.10.11.64 identifier 1 version 4.0

do a no sccp and then sccp

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: callmanager 6.1 with NM-HD-2VE=

this is what i get

SCCP Admin State: UP

Gateway IP Address: 10.10.16.32, Port Number: 2000

IP Precedence: 3

User Masked Codec list: None

Call Manager: 10.10.11.64, Port Number: 2000

Priority: N/A, Version: 3.1, Identifier: 2

Call Manager: 10.10.11.65, Port Number: 2000

Priority: N/A, Version: 3.1, Identifier: 1

SCCP application services(dspfarm profiles) are not enabled

or haven't associated to SCCP CCM group

New Member

Re: callmanager 6.1 with NM-HD-2VE=

sccp local FastEthernet0/0

sccp ccm 10.10.11.64 identifier 2

sccp ccm 10.10.11.65 identifier 1

sccp ip precedence 3

sccp

!

sccp ccm group 2

associate ccm 1 priority 2

associate ccm 2 priority 1

associate profile 2 register sat-vgw1-card2

!

sccp ccm group 1

associate ccm 1 priority 2

associate ccm 2 priority 1

associate profile 1 register sat-vgw1-card1

Hall of Fame Super Gold

Re: callmanager 6.1 with NM-HD-2VE=

Can you check "show diag" to see how much DSP resources are actually installed there ?

Cisco Employee

Re: callmanager 6.1 with NM-HD-2VE=

what IOS are you running?, maybe it is old and you would indeed need an upgrade

at least most of the times i have tried that WA has worked just fine when taking the version

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: callmanager 6.1 with NM-HD-2VE=

is there a compatability list for module with callmanager 6.1

Hall of Fame Super Gold

Re: callmanager 6.1 with NM-HD-2VE=

Ignore, posted in error.

New Member

Re: callmanager 6.1 with NM-HD-2VE=

question for users using version 6.1 or 5.1 what version do they select on the sccp

New Member

Re: callmanager 6.1 with NM-HD-2VE=

Hi  javalenc you are the best voice eng and i am your big fan,why dont you add me as you student so that i can learn lots of tech and solution and i can gain lots of knowledge from you...coz every post of yours and solution posted  worked for me all the time...thank you so much....If you dont mind can i get your mail id please.....

191
Views
0
Helpful
9
Replies
CreatePlease to create content