Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CallManager 8.0 and MS Active Directory

Hello,

I have a question regarding when CM make a request to Active Directory and use by default the account's fields: 'Name', 'TelephoneNumber'. Can I change that CM will be able to use the another account's fields in the AD?         

Thanks!          

2 ACCEPTED SOLUTIONS

Accepted Solutions
Super Bronze

CallManager 8.0 and MS Active Directory

Hi

For Telephone Number, you can use telephoneNumber or ipPhone.

'Name' isn't a field - you have sn, givenname (i.e. last name and firstname in CUCM) and these aren't negotiable.

If you are talking about userid, that's changeable but there are a lot of caveats with doing that.

You should read this and then come back with any questions: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/directry.html

Regards

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Green

CallManager 8.0 and MS Active Directory

Hi,

Have a read at this link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/b02ldsys.html#wpxref72074

There are many attributes that you can use

LDAP Attribute for User ID

If synchronization with the LDAP server is enabled, you can choose an LDAP attribute value for the user ID. Choose one of the following values from the drop-down list box:

For Microsoft Active Directory

sAMAccountName

mail

employeeNumber

telephoneNumber

userPrincipalName

Microsoft Active Directory Application Mode

uid

mail

employeeNumber

telephoneNumber

userPrincipalName

For Sun ONE LDAP Server, iPlanet, and OpenLDAP

uid

mail

employeeNumber

telephoneNumber

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
2 REPLIES
Super Bronze

CallManager 8.0 and MS Active Directory

Hi

For Telephone Number, you can use telephoneNumber or ipPhone.

'Name' isn't a field - you have sn, givenname (i.e. last name and firstname in CUCM) and these aren't negotiable.

If you are talking about userid, that's changeable but there are a lot of caveats with doing that.

You should read this and then come back with any questions: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/directry.html

Regards

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Green

CallManager 8.0 and MS Active Directory

Hi,

Have a read at this link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/b02ldsys.html#wpxref72074

There are many attributes that you can use

LDAP Attribute for User ID

If synchronization with the LDAP server is enabled, you can choose an LDAP attribute value for the user ID. Choose one of the following values from the drop-down list box:

For Microsoft Active Directory

sAMAccountName

mail

employeeNumber

telephoneNumber

userPrincipalName

Microsoft Active Directory Application Mode

uid

mail

employeeNumber

telephoneNumber

userPrincipalName

For Sun ONE LDAP Server, iPlanet, and OpenLDAP

uid

mail

employeeNumber

telephoneNumber

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
363
Views
0
Helpful
2
Replies