I am having a strange issue with my CallManager and 2851 Router with a T-1 PRI connection to the PBX. Users can dial into the VOIP network and dial out to the PBX no problem but when they enter voice mail or MeetingPlace and enter digits they are duplicated. For example if you dial into MeetingPlace and it prompts you for a meeting ID and you enter 1234, MeetingPlace receives 11223344. Any ideas on what maybe causing this?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...