Re: CallManager: block routing of GSM calls to a GSM Box if a ti
The route filter can only be applied to a .@ pattern. In your situation, the easiest thing to do would be to create a route pattern and assigned to a block partition. Apply the css w/ block to a user you want to avoid calling specified string. Create pattern you wish to block and on this pattern assign to partition X. Create CSS which lists partition X and assign this CSS to users which you wish to block for specified dial string
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...