03-08-2007 05:57 AM - edited 03-14-2019 08:22 PM
Hi,
A question, we have a Callmanager 4.1 cluster. When there's a problem with the callmanager it sends a email to one of my collegues. My question.. were is the configuration of this setting done?
Greetings, B
Solved! Go to Solution.
03-08-2007 06:11 AM
Hi B,
I'm guessing these alerts are coming from the RTMT (Real Time Monitoring Tool) Have a look;
Configuring E-mails for Alert Notification
The following procedure describes how to configure e-mails for alert notification.
Procedure
--------------------------------------------------------------------------------
Step 1 In the left controlling center pane, click the Alert tab.
Step 2 Click Alert Central.
The Alert Central monitoring window displays and shows the alert status and alert history of the alerts that RTMT generated in the Cisco CallManager cluster.
Step 3 From the RTMT menu bar at the top of the pane, choose Alert > Config Email Server.
The Mail Server Configuration window displays
Step 4 In the Mail Server field, enter the e-mail recipient information.
Step 5 In the Port field, enter the port number of the recipient.
Step 6 Click OK.
Cisco CallManager Serviceability System Guide, Release 4.1(3)
Real-Time Monitoring Tool
Hope this helps!
Rob
03-08-2007 06:11 AM
Hi B,
I'm guessing these alerts are coming from the RTMT (Real Time Monitoring Tool) Have a look;
Configuring E-mails for Alert Notification
The following procedure describes how to configure e-mails for alert notification.
Procedure
--------------------------------------------------------------------------------
Step 1 In the left controlling center pane, click the Alert tab.
Step 2 Click Alert Central.
The Alert Central monitoring window displays and shows the alert status and alert history of the alerts that RTMT generated in the Cisco CallManager cluster.
Step 3 From the RTMT menu bar at the top of the pane, choose Alert > Config Email Server.
The Mail Server Configuration window displays
Step 4 In the Mail Server field, enter the e-mail recipient information.
Step 5 In the Port field, enter the port number of the recipient.
Step 6 Click OK.
Cisco CallManager Serviceability System Guide, Release 4.1(3)
Real-Time Monitoring Tool
Hope this helps!
Rob
03-08-2007 02:19 PM
Hi Rob
Thanks for your help. I think this should help me out!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide